INVISALIGN COURSE ADVANCE

INVISALIGN COURSE
ADVANCE

Become the MASTER of Invisalign

¿Ready for the Challenge?

25 PROTOCOLS FOR THERAPEUTIC SUCCESS AND CLINICAL MANAGEMENT

GENERAL CONSIDERATIONS WHEN USING INVISALIGN
1. Introduction to the International Aligners Course (IAC): INVISALIGN technique.
2. The meeting point between different ideas and emerging technology. ITero /
3shape intraoral scanner / Carestream, CBCT, 3D facial scanner, 3D printing,
etc.
3. Transparent or plastic orthodontics: differences between the INVISALIGN
system, other aligners brands and the homemade (3D printed) orthodontic
aligners designed by different softwares
4. Basic and advanced nomenclature in plastic orthodontics: smartforces
(conventional attachments, optimized attachments, powers ridges, precision
cuts, pressure points, bite ramps); IPR, pontics, additional aligners, passive
aligners, refinement, additional aligners, overcorrection, virtual jump,
compliance indicators, eruption tabs and eruption compensators.
5. Invisalign website (Invisalign Doctor site -ID-): step by step to master the use
and the advantage of each of its functions: case submission and my clinical
preferences.
6. PROTOCOLS PRE-ESTABLISHED BY ALIGN TECH: Invisalign G3, G4, G5, G6 and G7

TREATMENT SELECTION (EXPRESS, LITE OR COMPRENHENSIVE), FIRST
APPOINMENT, REGISTRATION AND USE OF CLIN-CHECK PRO
1. Treatment Selection
2. Basic and advanced use of Clin-Check Pro (CCP)
3. FIRST APPOINTMENT PROTOCOL
4. INITIAL RECORDS PROTOCOL
5. RECORDS SENDING PROTOCOL
6. Basic marketing in the consultation
7. CLINCHECK REVIEW PROTOCOL
8. Effective and efficient communication guides with Invisalign technician.
9. CLIN- CHECK MANUAL REVIEW PROTOCOL
10. EVALUATION PROTOCOL, BOND OF ATTACHEMNTS AND IPR.
11. ALIGNERS CHANGE PROTOCOL. 10/14/7/5 days.
12. CHECK APPOINTMENTS PROTOCOL
13. REFINEMENT PROTOCOL / ADDITIONAL ALIGNERS
14. RETENTION PROTOCOL
TRANSVERSAL, SAGITTAL, VERTICAL AND ASYMMETRIC CORRECTIONS. EXTRACTIONS
AND SURGICAL CASES.
A. TRANSVERSAL problem correction dental, dentoalveolar or skeletal origin.
  1. GROWING PATIENTS PROTOCOLS WITH TRANSVERSAL PROBLEMS
  2. PATIENTS WITHOUT GROWTH PROTOCOLS WITH TRANSVERSAL PROBLEMS
  3. RPE / MARPE + INVISALIGN + DSD PROTOCOL
  4. INVISALIGN AND AIRWAYS PROTOCOL. Introduction to Effects after correction of the
    transverse problem.

B. Correction of SAGITAL problem dental or skeletal origin.

  1. CLASS II & III growing patient PROTOCOL
  2. Patient without growth CLASS II & III PROTOCOLS

C. VERTICAL problem correction of dental, dentoalveolar or skeletal origin.

  1. OPEN BITE PROTOCOL.
  2. PROTOCOL FOR DEEP BITE CORRECTION PROTOCOL

D. Correction of VERTICAL problem in COMBINATION with SAGITAL problem of skeletal and dental origin.

  1. Orthopedic treatment of growing patients and adults. PROTOCOL IN OPEN BITE + CLASS II
    OR III SAGITAL PROBLEM.
  2. PROTOCOL CASES UPPER EXTRACTIONS.
  3. PROTOCOL CASES LOWER EXTRACTIONS.

GENERAL CONSIDERATIONS WHEN USING INVISALIGN
1. Introduction to the International Aligners Course (IAC): INVISALIGN technique.
2. The meeting point between different ideas and emerging technology. ITero /
3shape intraoral scanner / Carestream, CBCT, 3D facial scanner, 3D printing,
etc.
3. Transparent or plastic orthodontics: differences between the INVISALIGN
system, other aligners brands and the homemade (3D printed) orthodontic
aligners designed by different softwares
4. Basic and advanced nomenclature in plastic orthodontics: smartforces
(conventional attachments, optimized attachments, powers ridges, precision
cuts, pressure points, bite ramps); IPR, pontics, additional aligners, passive
aligners, refinement, additional aligners, overcorrection, virtual jump,
compliance indicators, eruption tabs and eruption compensators.
5. Invisalign website (Invisalign Doctor site -ID-): step by step to master the use
and the advantage of each of its functions: case submission and my clinical
preferences.
6. PROTOCOLS PRE-ESTABLISHED BY ALIGN TECH: Invisalign G3, G4, G5, G6 and G7

TREATMENT SELECTION (EXPRESS, LITE OR COMPRENHENSIVE), FIRST
APPOINMENT, REGISTRATION AND USE OF CLIN-CHECK PRO
1. Treatment Selection
2. Basic and advanced use of Clin-Check Pro (CCP)
3. FIRST APPOINTMENT PROTOCOL
4. INITIAL RECORDS PROTOCOL
5. RECORDS SENDING PROTOCOL
6. Basic marketing in the consultation
7. CLINCHECK REVIEW PROTOCOL
8. Effective and efficient communication guides with Invisalign technician.
9. CLIN- CHECK MANUAL REVIEW PROTOCOL
10. EVALUATION PROTOCOL, BOND OF ATTACHEMNTS AND IPR.
11. ALIGNERS CHANGE PROTOCOL. 10/14/7/5 days.
12. CHECK APPOINTMENTS PROTOCOL
13. REFINEMENT PROTOCOL / ADDITIONAL ALIGNERS
14. RETENTION PROTOCOL
TRANSVERSAL, SAGITTAL, VERTICAL AND ASYMMETRIC CORRECTIONS. EXTRACTIONS
AND SURGICAL CASES.
A. TRANSVERSAL problem correction dental, dentoalveolar or skeletal origin.
  1. GROWING PATIENTS PROTOCOLS WITH TRANSVERSAL PROBLEMS
  2. PATIENTS WITHOUT GROWTH PROTOCOLS WITH TRANSVERSAL PROBLEMS
  3. RPE / MARPE + INVISALIGN + DSD PROTOCOL
  4. INVISALIGN AND AIRWAYS PROTOCOL. Introduction to Effects after correction of the
    transverse problem.

B. Correction of SAGITAL problem dental or skeletal origin.

  1. CLASS II & III growing patient PROTOCOL
  2. Patient without growth CLASS II & III PROTOCOLS

C. VERTICAL problem correction of dental, dentoalveolar or skeletal origin.

  1. OPEN BITE PROTOCOL.
  2. PROTOCOL FOR DEEP BITE CORRECTION PROTOCOL

D. Correction of VERTICAL problem in COMBINATION with SAGITAL problem of skeletal and dental origin.

  1. Orthopedic treatment of growing patients and adults. PROTOCOL IN OPEN BITE + CLASS II
    OR III SAGITAL PROBLEM.
  2. PROTOCOL CASES UPPER EXTRACTIONS.
  3. PROTOCOL CASES LOWER EXTRACTIONS.

HANDS-ON

TAKING RECORDS WITH ITERO INTRAORAL SCAN VS CONVENTIONAL
IMPRESSIONS.
You will learn to scan complex structures such as edentulous areas, third molar area,
periodontal teeth or extensive amalgam restorations.

INTER-PROXIMAL REDUCTION (IPR) AND PLACEMENT OF ATTACHMENTS.
Different types of IPR will be carried out, both in animal models, and in biomodels specially
prepared with different types of crowding.

MANUAL ADJUSTMENT OF ALIGNERS.
You can cut, adjust and add pressure buttons to the aligners to know the different options
that can be made for a better optimization of the system in some cases.

ELABORATION OF CLIN-CHECKS EXCLUSIVELY WITH DENTAL MOVEMENT
THROUGH 3D CONTROLS CLIN-CHECK PRO.
A full Class I / II / III CC will be performed using the 3D controls. CC technique in two
steps.

ELABORATION OF CLIN-CHECKS INCLUDING DENTAL AND SKELETAL
MOVEMENTS USING 3D CLIN-CHECK PRO CONTROLS
A complete CC of Class II will be made by mandibular advancement and class III by
maxillary advance using the 3D controls of the Clin-Check. CC technique two steps.

DR. RAMÓN MOMPELL

  • Active member of the research team in the Craniofacial Growth and Development Division. Dep. Orthodontics, University of California at Los Angeles (UCLA)
  • Professor at the University of Ajou, Seoul, Korea
  • Professor at the University of Coimbra, Portugal.
  • Master Orthodontics and Craniofacial Orthopedics. Jiménez Díaz Foundation Hospital. Madrid
  • Clinical residency, Department of Orthodontics, University of Sao Paulo (USP), Brazil
  • Invisalign Diamond II

SPEAKERS OF THE COURSE

– Active member of the research team in the Craniofacial Growth and Development Division. Dep.
Orthodontics. University of California at Los Angeles (UCLA)
– Professor at the University of Ajou, Seoul, Korea.
– Professor at the University of Coimbra, Portugal.
– Master’s Degree in Orthodontics and Craniofacial Orthopedics. Jiménez Díaz Foundation
Hospital. Madrid.
– Clinical residence, Department of Orthodontics, University of Sao Paulo (USP), Brazil.
– Invisalign Diamond II

– Degree in Dentistry University of Valencia
– Official master’s degree in orthodontics and dentofacial orthopedics UCH-CEU
– Master and official Invisalign® certification
– Incognito® certification course
– Tweed postgraduate study course. Arizona. USA.
– Spanish Society Member Orthodontics AESOR Member
– Member of the world federation of orthodontists

COLLABORATORS OF THE COURSE

– Degree in Dentistry. Universidad Complutense de Madrid

– Master’s Degree in Oral Surgery. University of Alcalá. Oral and Maxillofacial Surgery Service
Prince of Asturias Hospital.

– President of the International Association of Aerospace Dentistry

– Master Professor of Surgery at the Rey Juan Carlos University

– Collaborator Master of Implantology Surgery, Prosthesis and Periimplantology UAX.

– Master Professor Oral Surgery University of Alcala Oral and Maxillofacial Surgery Service
Príncipe de Asturias Hospital 2011-2016.

– Director and founder of Dental Focus

– Bachelor of Science in Chemistry (Univ. Oviedo and Padua) with doctorate studies in Medical
Chemistry (Univ. Cardiff).

– Certificate in executive coaching by AECOP.

– Diploma in Neurolinguistic Programming by the AEPNL.

– Specialist in Training and coaching of dental clinics in national and international territory.

DRA. ELENA ZAPLANA

  • Degree in Dentistry University of Valencia
  • Official master's degree in orthodontics and dentofacial orthopedics UCH-CEU
  • Master and official Invisalign® certification
  • Incognito® certification course
  • Tweed postgraduate study course. Arizona. USA
  • Spanish Society Member Orthodontics AESOR Member
  • Member of the world federation of orthodontists

COURSE DETAILS

Modality

On Site Theoretical-Practical Intensive week: 5 days

Teachers

Dr. Ramón Mompell, Dr. Elena Zaplana, Dr. Jose Luís Mompell and Pedro Morchón

Dates

Option 1: 12-16 September 2020
COMPLETE

Option 2: 21-25 November 2020 PLACES AVAILABLE

Language

ONLY IN SPANISH 🇪🇸

Place

Madrid, Spain

Schedule

Saturday: 10am - 6pm (Dra. Elena Zaplana)
Sunday 10am - 6pm (Dra. E. Zaplana)
Monday 10am - 6pm (Dr. R. Mompell, Dr. JL. Mompell y P. Morchón)
Tuesday 10am - 6pm (Dr. R. Mompell)
Wednesday 10am - 6pm (Dr. R Mompell)

Price

3490 €

Payment Methods

Single payment: 3490 €

Split payment: Reservation (1990 €) + Payment 1 (€ 750) + Payment 2 (€ 750)

CLINICAL CASES

iTero by Invisalign | Align Tech

To become a Diamond you will need iTero as your main partner. In our course we will offer you the best options for you to get one, because we firmly believe in:

1.Advantages of its use and inconvenience of using impressions
2. Key tool in presentation of treatment and sale
3.Reduction of times in cases and improvement in the quality of treatment
4. Patient satisfaction
5. Reduced amortization time due to guaranteed success

FREQUENTLY ASKED QUESTIONS

To guarantee a place in the course you must make at least the payment of the reservation
(1990 €), once we have confirmed you as a student of the course.
If you do not opt for a single payment, the remaining amount can be paid in one or two additional payments.
The entire course must be paid before the start of the first day

All practice materials are included in the price. The student must provide a computer with windows and with the CC PRO installed.

The course will be held in the center of Madrid. Therefore, any accommodation in the center of Madrid would be recommended.

All the companies collaborating with the course will make an exclusive offer for the course participants, such as Orthopulse, DentalMonitoring and ITERO.
*** The exclusive pliers of Dr. Mompell can be purchased for the manual adjustment of the aligners.

Testimonials

DO YOU HAVE ANY QUESTIONS?

Before submitting the form, you should read the basic information on data protection here.